|
$ groff -man -Tascii libLDA.3 | col -b > manual.txt
LIBLDA(3) libLDA Manual LIBLDA(3)
NAME
LibLDA - slow control and acquisition layer for Calice's LDA
SYNOPSIS
#include "libLDA.hh"
src/run/dump [-h] [OPTIONS] CONFIG
src/run/ping [-h] [OPTIONS] CONFIG
src/run/fifo [-h] [OPTIONS] CONFIG
src/run/rng [-h] [OPTIONS] CONFIG
src/run/config [-h] [OPTIONS] CONFIG
src/run/driver [-h] [OPTIONS] CONFIG
exemple [-h] [OPTIONS] CONFIG
tools/utDevice [-h] [OPTIONS] CONFIG
tools/utDaq [-h] [OPTIONS]
DESCRIPTION
libLDA is a library that drive the LDA Calice's devices. The library
provides non-regression tests as dump, ping, fifo, config and driver
and exemples executables as exemple but also utDevice and utDaq that
extend the purpose of this library in order to drive a full Calice
bench test.
OPTIONS
The following options are supported:
-c , --conf-source
Specify the way to load configuration (default is file), among
file, static and db.
-p , --eth-port
Override the ethernet port on the host specified in configura-
tion (eth0, ...)
-a , --lda-address
Override the ethernet mac address specified in the config file
(in aa:bb:cc:dd:ee:ff format)
-v , --debug-print
Set logging level (default: INFO) among: DEBUG, INFO, WARNING,
ERROR, NONE
-f , --syslog
Use syslog instead of the standard output for log messages
-n , --no-reinit
Do not reinitialize LDA, DCC and DIF hardware.
-s , --single
Do not enter into infinite loop but do the job only once.
-m , --mode
Set the mode (default: 8) among: 8 (ilc-manual), 0 (ilc-auto) or
4 (beam-test) Note: today only the beam-test is functional
-o , --time-out
Set the read-out trigger timeout (unit is microsecond)
-i , --pcap-buffsize
Set PCAP input buffer size (unit is 1Ko packet)
-t , --trig-buffsize
Set the read-out trigger buffer size (unit is 1 trigger)
-d , --data-buffsize
Set the read-out data buffer size (unit is 2 bytes)
Note: beware that data buffer size is at less equal to the size
of maximum event size.
-S , --freq-slc
Set slow control frequency (unit is Hertz)
Note: this thread is not included into the libLDA.
-T , --freq-slc
Set trigger frequency (unit is Hertz)
Note: this thread, not included in the libLDA, only run in the 8
(ilc-manual) mode.
-U , --freq-usr
Set user read out frequency (unit is Hertz)
Note: this thread is not included into the libLDA.
-h, --help
Print a short help text describing the supported command-line
options, and then exit.
FILES
data/dif-X-Y.txt
use by exemple to write output data
data/EE:FF:X.Y.txt
used by utDevice and utDaqP to write the output data
REPORTING BUGS
Please send a report to nicolas.roche@llr.in2p3.fr
AUTHORS
Nicolas Roche, David Decotigny.
LICENCE
This software is released under the GNU General Public License. Please
read the COPYING file for more information.
SEE ALSO
The full documentation for libLDA is maintained as a Latex2Html
intranet. If a browser is installed at your site, the URL
<http://polype/~roche/calicei/> should give you access to the complete
manual.
libLDA(5), calDump(1), pcat(1)
Version 1.0 August 16, 2011 LIBLDA(3)
|
